Description
Garage Door Retainer – 1 Inch 90 Degree
If mounting to a metal surface, we carry screws here – Weather Seal Screws
Brush & Blade Seal Retainer
Brush & Blade Seal Retainers, see our line drawing for measurements of this item.
Choose from 8 different retainer profiles.
These brush seal retainers are sold in 55″ lengths and combined to achieve any total length required.
Due to shipping reasons we ship brush seal retainers in lengths of 55″
1 – Length = 55”
2 – Lengths =110’ or 9’2”
3 – Lengths = 165” or 13’-9”
4 – Lengths = 220” or 18’-4”
5 – Lengths = 275” or 22’-11”
6 – Lengths = 330″ or 27′-6″
7 – Lengths = 385″ or 32′-1″
8 – Lengths = 440″ or 36′-8″
9 – Lengths = 495″ or 41′-3″
10- Lengths = 550″ or 45′-10″
As seen in the photos above we carry brush seals in any continuous length required.
To see our various brush seals, click here – BRUSH SEAL
To see our various blade seals, click here – BLADE SEAL
These retainers can be used with our BLADE and our BRUSH seals, see above links for options on blade and brush seals
These brush & blade seal retainers, used in conjunction with our flexible brush seals allow you to combine the perfect brush seal retainer to the exact brush seal. This gives you unlimited customization possibilities.
Below is some information on our flexible brush seals that can be found by using the above link. We off a unique “flexible” types of brush seal.
Brush seals are used in any situation that has an uneven surface that needs to be sealed. Great for shutter type doors, rolling doors and other doors that have imperfect gaps, varied gaps, rough surfaces, slats that present an uneven surface and many, many other instances where a rubber or vinyl seal will just not work. Brush seals are a “go to” seal and are great to have on hand for custom situations.
We carry a unique brush seal in that it is flexible, we can roll this product enabling us to ship long lengths. Other type of brush seals, that are rigid, are unable to ship in long lengths. UPS for instance will only take up to 8′ long items, anything longer would need to ship on a semi truck and is cost prohibitive.
This material is very easy to cut with a hacksaw.
This type of brush seal is a convenient, money saving alternative to traditional rigid back brush seals.
Our brush seal is made of rugged yet lightweight and pliable materials, this flexible brush seal weighs up to 40% less than conventional brush seals and is available on rolls, drastically reducing shipping costs.
Eliminates scrap, waste and splices.
Easy transport and storage.
Can be cut on site to the “exact” length required.
Resistance against to corrosion and chemicals.
Homogeneous bond between the backing material and the filament.
90 Degree Garage Door Retainer – 1″
